Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR6570 — Trang 17/21

Code: E610

Description: The HDD encryption key is faulty. (hardware composition error, initialization error, ID key error, ID processing error)
Remedy: - Check the hardware composition. - Turn off and then on the main power.

Code: E611-0000

Description: retried reboot due to SRAM crash and the like during the shutdown recovery job execution
SRAM data were broken and the stored job information cannot be read; this causes the repeated reboot trials to recover the power shutdown, and thus the redundant job transmission. This phenomenon triggers E code.
Remedy: Clear SRAM to cancel the shutdown recovery job.

Code: E612

Description: error in postponement Timing: when starting the host machine
Remedy: Write the correct license and new serial numbers and turn off/on the power switch. - Turn off and then on the main power.

Code: E674-0001

Description: There is a fault in the communication between the fax controller PCB (2-line) and the main controller PCB.
An attempt to set fax device mode has failed.
Remedy: - Check the connection of the cable between the fax controller PCB (2-line) and the main controller PCB. - Replace the ROM DIMM of the fax controller PCB (2-line). - Replace the fax controller PCB (2-line). - Replace the main controller PCB.

Code: E710-0001

Description: There is a fault in IPC initialization.
At time of power-on, the communications IC on the main controller PCB does not become ready within 3 sec after start-up.
Remedy: - Check the connection of the cable.

Code: E710-0002

Description: There is a fault in IPC initialization.
At power-on, the machine communication IC has detected an error.
Remedy: - Check the connection of the cable.

Code: E711-0001

Description: There is a fault in the IPC communication.
After power-on, the occurrence of an error has been written 4 times in 1.5 sec to the error register of the communications IC on the main controller PCB.
Remedy: - Check the connection of the cable.

Code: E711-0002

Description: There is a fault in the IPC communication.
After power-on, the machine communication IC has detected an error.
Remedy: - Check the connection of the cable.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie