Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC2100S — Trang 8/17

Code: E503-0003

Description: An error is detected in the communication with the saddle sitcher.
Causes: A communication error has been detected.

Code: E504-0004

Description: The adjustment of the sensor made using a DIP switch is faulty.
Causes: The output of the height sensor (PS1) is faulty.

Code: E505-0001

Description: At power-on, the check sum value is found to be faulty.
Causes: The backup RAM is faulty.

Code: E510

Description: After the motor drive signal has been generated, the input signal of the nonsort motor clock sensor (PI10) does not change within 60 msec.
Causes: The no-sort motor (M6) does not rotate.

Code: E512-0001

Description: At the start of operation, the target number of clock pulses cannot be obtained from the delivery motor clock.
Causes: The delivery motor is faulty. The delivery motor clock sensor (PI10) is faulty.

Code: E512-0002

Description: During feeding, clock pulses are absent for a period equivalent of 200 mm.
Causes: The delivery motor is faulty. The delivery motor clock sensor (PI10) is faulty.

Code: E525

Description: Auto adjustment of the bin inside paper sensor (S1, S2) fails, or the auto adjustment value has an error.
Causes: Auto adjustment of the bin inside paper sensor (S1, S2) is faulty.

Code: E530

Description: After the motor drive signal has been generated, the input signal of the guide bar HP sensor (PI3) does not change within 200 msec.
Causes: The guide bar swing motor (M3) fails to rotate.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie