Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC2380i — Trang 11/27

Code: E508-0001

Description: Error in different model
At start-up, when the pickup/delivery option for different model is detected.
Remedy: Replace to the supported pickup option (side paper deck), delivery option (finisher) for this model.

Code: E514-8001

Description: Stack delivery error / End assist motor error Finisher-Z1
The HP sensor fails to be ON within 1500ms after the return belt starts to move to its HP.
Remedy: Check on a drive of the stack retaining roller, Replace the return belt U-turn HP sensor (SR5) , Replace the stack delivery motor (M2)

Code: E514-8001

Description: Stack delivery error / End assist motor error Finisher-Y1, Saddle Finisher-Y2
The HP sensor fails to be OFF after the end assist motor rotates for a specific period of time.
Remedy: Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39)

Code: E514-8002

Description: Stack delivery error / End assist motor error Finisher-Z1
The HP sensor fails to be OFF within 1500ms after the return belt starts to move to the belt contact position.
Remedy: Check on a drive of the stack retaining roller, Replace the return belt U-turn HP sensor (SR5) , Replace the stack delivery motor (M2)

Code: E514-8002

Description: Stack delivery error / End assist motor error Finisher-Y1, Saddle Finisher-Y2
The HP sensor fails to be ON after the end assist motor rotates for a specific period of time.
Remedy: Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39)

Code: E519-8001

Description: Gear change motor error Finisher-Y1, Saddle Finisher-Y2
The HP sensor fails to be OFF after the end assist motor rotates for a specific period of time.
Remedy: Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39)

Code: E519-8002

Description: Gear change motor error Finisher-Y1, Saddle Finisher-Y2
The HP sensor fails to be ON after the end assist motor rotates for a specific period of time.
Remedy: Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39)

Code: E530-8001

Description: Rear alignment error Finisher-Z1
The HP sensor fails to be ON within 2000ms after the rear adjuster plate starts to move to its HP.
Remedy: Replace the rear adjuster plate HP sensor (SR4) , Replace the rear adjuster plate motor (M4)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie