Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC2570F — Trang 13/27

Code: E514-0001

Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be OFF after the end assist motor rotates for a specific period of time.
Remedy: Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39)

Code: E514-0002

Description: Stack delivery error Finisher-P1
The HP sensor fails to be OFF within 1500ms after the return belt starts to move to the belt contact position.
Remedy: Check on a drive of the stack retaining roller, Replace the return belt U-turn HP sensor (SR5) , Replace the stack delivery motor (M2)

Code: E514-0002

Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be ON after the end assist motor rotates for a specific period of time.
Remedy: Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39)

Code: E519-0001

Description: Gear change motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be OFF after the gear change motor rotates for a specific period of time.
Remedy: Replace the gear change HP sensor (PI49) , Replace the gear change motor (M40)

Code: E519-0002

Description: Gear change motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be ON after the gear change motor rotates for a specific period of time.
Remedy: Replace the gear change HP sensor (PI49) , Replace the gear change motor (M40)

Code: E530-0001

Description: Rear alignment error Finisher-P1
The HP sensor fails to be ON within 2000ms after the rear adjuster plate starts to move to its HP.
Remedy: Replace the rear adjuster plate HP sensor (SR4) , Replace the rear adjuster plate motor (M4)

Code: E530-0001

Description: Front alignment error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be OFF after the front jog motor rotates for a specific period of time.
Remedy: Replace the front adjuster plate HP sensor (PI36) , Replace the front adjuster plate motor (M33)

Code: E530-0002

Description: Rear alignment error Finisher-P1
The HP sensor fails to be OFF within 1000ms after the rear adjuster plate starts to move from its HP.
Remedy: Replace the rear adjuster plate HP sensor (SR4) , Replace the rear adjuster plate motor (M4)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie