Description: The rise in temperature in the fixing unit at time of power-on is inadequate.
After power-on, the output of the noncontact thermistor does not reach 40°C within 180 sec.
Description: The fixing unit is overheating.
The difference in temperature between the non-contact thermistor and the end thermistor remains 80°C or more for 500 msec.
Description: The fixing unit is overheating.
At the end of initial rotation, the difference in temperature between the sub (end) thermistor and the main (non-contact) thermistor is 20°C or more for 100 msec. (A reversal in temperature (caused, for example, by a piece of residual paper) is detected.)
Description: The rise in temperature of the fixing unit is inadequate.
The output of the non-contact thermistor does not reach 60°C within 240 sec after it has reached 40°C.
Description: The rise in temperature of the fixing unit is inadequate.
The output of the non-contact thermistor does not reach 90°C within 180 sec after it has reached 60°C.
Description: The rise in temperature of the fixing unit is inadequate.
The output of the non-contact thermistor does not reach 120°C within 240 sec after it has reached 90°C.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.