Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC2620 — Trang 7/19

Code: E240-0000

Description: The communication between the main motor controller and the DC controller is faulty.
There is a fault in the serial communication between the main controller and the DC controller.

Code: E243-0000

Description: The control panel is faulty.
There is a fault in the communication between the controller and the control panel.

Code: E248-0000

Description: The EEPROM on the reader controller PCB is faulty.
The ID stored in EEPROM (read when the main power is turned on) and the ID stored in the flash ROM fail to match.

Code: E302-0000

Description: A fault has occurred in relation to shading correction.
A time-out has occurred in shading operation. The shading processing does not end 1 sec after it has started.

Code: E302-0001

Description: A fault has occurred in relation to shading correction.
A time-out has occurred in gain/ offset correction by the analog processor. The gain/offset correction (setting operator) by the analog processor does not end 1 sec after it has started.

Code: E315-0001

Description: The image data is faulty.
A time-out condition has occurred in encoding/ decoding processing of image data.

Code: E351-0000

Description: The ECO-ID PCB is faulty.
There is a fault in the initial communication.

Code: E402

Description: There is a fault in the feeder motor. DADF-K1
The feeder motor (M2) fails to rotate. The feeder motor clock sensor (SR1) is faulty. The feeder motor encoder pulse is not detected within 0.3 sec after the DF feeder motor drive signal has been turned ON.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie