• Code: E609-0008
• Description: Abnormal low temperature of the hard disk
  At start-up, temperature of the HDD fails to reach the specific level within a specific period of time.
• Remedy: Replace the HDD

• Code: E609-0009
• Description: Abnormal low temperature of the hard disk
  During recovery from sleep mode, temperature of the HDD is below the specific level within the specific period of time.
• Remedy: Replace the HDD

• Code: E610
• Description: Failure in the hard disk cryptographic key
• Remedy:

• Code: E611-0000
• Description: Error in repeat of reboot due to fault of SRAM, etc.
  SRAM information is broken, job information stored in SRAM cannot be read and reboot is repeated at recovery from power-off
• Remedy: Clear SRAM to delete the shutdown assurance job.

• Code: E674
• Description: FAX board communication error
• Remedy: Check on connection between the FAX board and the main controller PCB, Replace the FAX board, Replace the main controller PCB

• Code: E677
• Description: Abnormality of the external controller
• Remedy: Check on connection of the cable, Re-install the external controller system. Connect an appropriate controller, Re-install the external controller system. Check on connection of the cable, Re-install the external controller system

• Code: E710-0000
• Description: IPC initialization error
  Error in initialization of IPC chip
• Remedy: Check the connection of cable, Replace the DC controller PCB

• Code: E710-0001
• Description: IPC initialization error
  The status fails to be ready within 3 sec after the IPC chip starts up.
• Remedy: Check on connection of the cable