Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC3170F — Trang 7/27

Code: E020-XXA8

Description: Drum/Developer-related error XX=01:Y XX=02:M XX=03:C XX=04:K XX=00:Any color
In ATR control, the detected T/D ratio is upper than its upper limit (13%) 3 times in succession.
Remedy: Check on toner leak from toner buffer in the developing unit, Replace the ATR sensor

Code: E020-XXA9

Description: Drum/Developer-related error XX=01:Y XX=02:M XX=03:C XX=04:K XX=00:Any color
In ATR control, the detected T/D ratio is lower than its lower limit (3%) 3 times in succession.
Remedy: Check on attachment of the developing unit, Replace the ATR sensor

Code: E021-0001

Description: Developing rotary error
HP of the developing rotary fails to be detected.
Remedy: Check on connection of the HP sensor, between the rotary motor and the DC controller PCB, Replace the HP sensor, Replace the DC controller PCB, Replace the rotary motor

Code: E021-0002

Description: Developing rotary error
Flag detection timing while the developing rotary rotates is too fast or too late.
Remedy: Check on connection of the HP sensor, between the rotary motor and the DC controller PCB, Replace the HP sensor, Replace the DC controller PCB, Replace the rotary motor

Code: E021-0003

Description: Developing rotary error
The sensor fails to detect the flag when the developing rotary stops at the developing position.
Remedy: Check on connection of the HP sensor, between the rotary motor and the DC controller PCB, Replace the HP sensor, Replace the DC controller PCB, Replace the rotary motor

Code: E026-XX01

Description: Toner empty error XX=01:Y XX=02:M XX=03:C XX=04:K
After toner runs out, toner density fails to go back to normal even if toner replacement and toner recovery have been performed 5 times or more in succession.
Remedy: Replace the toner container, Check on a position of the developing shutter

Code: E032-0001

Description: The counter of the NE controller fails to operate.
A break in the count pulse signal is detected.
Remedy: Check on a break in the cable

Code: E045-0001

Description: OHP sensor error
The sampling data measured during initial multiple rotations is lower than the specific level.
Remedy: Replace the OHP sensor
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie