Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC3180C — Trang 17/27

Code: E542-0002

Description: Lower tray up/down error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
Area is abnormal.
Remedy: Replace the shift motor (M38) of the tray 2, Replace the shift area sensor PCB of the tray 2

Code: E542-0003

Description: Lower tray up/down error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The safety switch is activated.
Remedy: Replace the shift motor (M38) of the tray 2, Replace the shift area sensor PCB of the tray 2

Code: E577-0001

Description: Paddle error Finisher-P1
The HP sensor fails to be ON within 1500ms after the paper retaining paddle starts to move to its HP.
Remedy: Replace the paddle HP sensor (SR8) , Replace the paddle motor (M6)

Code: E577-0002

Description: Paddle error Finisher-P1
The HP sensor fails to be OFF within 1000ms after the paper retaining paddle starts to move from its HP.
Remedy: Replace the paddle HP sensor (SR8) , Replace the paddle motor (M6)

Code: E580-0001

Description: Stack tray up/down error
The stack tray fails to reach the stack tray height sensor 4sec. after the stack tray up/down motor starts to move up the tray; or the stack tray fails to come out of the height sensor.
Remedy: Check on overload on the stack tray up/down motor, Replace the stack tray up/down motor (M5), Replace the stack tray paper height sensor (S10) , Replace the stack tray up/down motor clock sensor (S9)

Code: E584-0001

Description: Shutter unit error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The shutter open sensor fails to be OFF (The shutter cannot be closed).
Remedy: Replace the stack ejection motor (M32) , Replace the shutter open/close clutch (CL31), Replace the shutter HP sensor (PI45)

Code: E584-0002

Description: Shutter unit error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The shutter open sensor fails to be ON (The shutter cannot be opened).
Remedy: Replace the stack ejection motor (M32) , Replace the shutter open/close clutch (CL31), Replace the shutter HP sensor (PI45)

Code: E590-0001

Description: Puncher motor error
The puncher HP sensor fails to be detected after the puncher motor is driven for 200ms.
Remedy: Replace the puncher HP sensor, Replace the puncher motor
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie