Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC3180C — Trang 15/27

Code: E532-0002

Description: Staple unit shift error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be ON after the stapler shift motor rotates for a specific period of time.
Remedy: Replace the stapler shift HP sensor (PI50) , Replace the stapler shift motor (M35)

Code: E535-0001

Description: Swing error Finisher-P1
The HP sensor fails to be ON within 2000ms after the swing arm starts to move to its HP.
Remedy: Check on operation of the stack delivery motor swing mechanism, Replace the swing cam HP sensor (SR7) , Replace the swing cam motor (M5)

Code: E535-0001

Description: Swing error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be OFF after the swing motor rotates for a specific period of time.
Remedy: Replace the swing HP sensor (PI35) , Replace the swing motor (M36)

Code: E535-0002

Description: Swing error Finisher-P1
The HP sensor fails to be OFF within 1000ms after the swing arm starts to move from its HP.
Remedy: Check on operation of the stack delivery motor swing mechanism, Replace the swing cam HP sensor (SR7) , Replace the swing cam motor (M5)

Code: E535-0002

Description: Swing error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be ON after the swing motor rotates for a specific period of time.
Remedy: Replace the swing HP sensor (PI35) , Replace the swing motor (M36)

Code: E537-0001

Description: Front alignment error Finisher-P1
The HP sensor fails to be ON within 2000ms after the front adjuster plate starts to move to its HP.
Remedy: Replace the front adjuster plate HP sensor (SR3) , Replace the front adjuster plate motor (M3) , Replace the adjuster plate drive belt

Code: E537-0001

Description: Rear alignment error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
The HP sensor fails to be OFF after the swing motor rotates for a specific period of time.
Remedy: Replace the rear adjuster plate HP sensor (PI37) , Replace the rear adjuster plate motor (M34)

Code: E537-0002

Description: Front alignment error Finisher-P1
The HP sensor fails to be OFF within 1000ms after the front adjuster plate starts to move from its HP.
Remedy: Replace the front adjuster plate HP sensor (SR3) , Replace the front adjuster plate motor (M3) , Replace the adjuster plate drive belt
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie