• Code: E514-0001
• Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
  The HP sensor fails to be OFF after the end assist motor rotates for a specific period of time.
• Remedy: Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39)

• Code: E514-0002
• Description: Stack delivery error Finisher-P1
  The HP sensor fails to be OFF within 1500ms after the return belt starts to move to the belt contact position.
• Remedy: Check on a drive of the stack retaining roller, Replace the return belt U-turn HP sensor (SR5) , Replace the stack delivery motor (M2)

• Code: E514-0002
• Description: End assist motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
  The HP sensor fails to be ON after the end assist motor rotates for a specific period of time.
• Remedy: Replace the end assist HP sensor (PI39) , Replace the end assist motor (M39)

• Code: E519-0001
• Description: Gear change motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
  The HP sensor fails to be OFF after the gear change motor rotates for a specific period of time.
• Remedy: Replace the gear change HP sensor (PI49) , Replace the gear change motor (M40)

• Code: E519-0002
• Description: Gear change motor error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
  The HP sensor fails to be ON after the gear change motor rotates for a specific period of time.
• Remedy: Replace the gear change HP sensor (PI49) , Replace the gear change motor (M40)

• Code: E530-0001
• Description: Rear alignment error Finisher-P1
  The HP sensor fails to be ON within 2000ms after the rear adjuster plate starts to move to its HP.
• Remedy: Replace the rear adjuster plate HP sensor (SR4) , Replace the rear adjuster plate motor (M4)

• Code: E530-0001
• Description: Front alignment error Finisher-Q1/Q3, Saddle Finisher-Q2/Q4
  The HP sensor fails to be OFF after the front jog motor rotates for a specific period of time.
• Remedy: Replace the front adjuster plate HP sensor (PI36) , Replace the front adjuster plate motor (M33)

• Code: E530-0002
• Description: Rear alignment error Finisher-P1
  The HP sensor fails to be OFF within 1000ms after the rear adjuster plate starts to move from its HP.
• Remedy: Replace the rear adjuster plate HP sensor (SR4) , Replace the rear adjuster plate motor (M4)