• Code: E067-0101
• Description: High voltage-related error (Primary transfer)
  The first detected current of primary transfer ATVC is the threshold or more.
• Remedy: Check on the primary transfer roller spring, Clean the position where the primary transfer roller contacts, Replace the primary transfer roller, Replace the drum unit Check a value of COPIER> DISPLAY> MISC> DRM-LIFE, and replace the drum unit if the value is near 100 because the drum may have reached its life expectancy.

• Code: E067-0102
• Description: High voltage-related error (Primary transfer)
  The two detected currents of primary transfer ATVC are both the threshold or less.
• Remedy: Check on the primary transfer roller spring, Clean the position where the primary transfer roller contacts, Replace the primary transfer roller, Replace the drum unit Check a value of COPIER> DISPLAY> MISC> DRM-LIFE, and replace the drum unit if the value is near 100 because the drum may have reached its life expectancy.

• Code: E067-0103
• Description: High voltage-related error (Primary transfer)
  The two detected currents of primary transfer ATVC are the same each other.
• Remedy: Check on the primary transfer roller spring, Clean the position where the primary transfer roller contacts, Replace the primary transfer roller, Replace the drum unit Check a value of COPIER> DISPLAY> MISC> DRM-LIFE, and replace the drum unit if the value is near 100 because the drum may have reached its life expectancy.

• Code: E100-0000
• Description: BD error
  Lock of the BD control fails while rotation of the polygon motor is stable.
• Remedy: Check on connection between the laser scanner unit and the DC controller PCB, Check on 24V line fuse, Replace the laser scanner unit

• Code: E110-0000
• Description: Error in polygon motor
  BD control is not locked when 5 sec passed after the activation of polygon motor.
• Remedy: Check on connection between the laser scanner unit and the DC controller PCB, Check on 24V line fuse, Replace the laser scanner unit.

• Code: E110-0001
• Description: Error in polygon motorSpeed lock of the FG speed control fails to be executed 5 sec after the polygon motor starts to operate (Does not reach the specified speed).
• Remedy: Check on connection between the laser scanner unit and the DC controller PCB, Check on 24V line fuse, Replace the laser scanner unit.

• Code: E193-0001
• Description: Error in IMG1 (error in add-on)
  Error in initialization of image ASIC of DC controller PCB (IMG)
• Remedy: Replace DC controller PCB

• Code: E202-0001
• Description: CIS unit HP detection error
  The HP sensor fails to be ON after the CIS unit moves backward for a specific distance or more.
• Remedy: Disconnect and then connect the connector, Replace the scanner HP sensor, Replace the scanner motor, Replace the reader controller PCB