• Code: E711-0001
• Description: IPC communication error
  Error is set to the error register of the IPC chip 4 times or more within 1.5 sec
• Remedy: Check on connection of the cable, Replace the ADF controller PCB, Replace the reader controller PCB

• Code: E713-0000
• Description: Communication error between the finisher and the printer
  Communication between the finisher and the copier stops.
• Remedy: Check on connection of the cable, Replace the finisher controller PCB, Replace the DC controller PCB

• Code: E716-0000
• Description: Error in communication to cassette pedestal, 2 / 3 delivery unit
  Error in data communication with cassette pedestal
• Remedy: Check cable connection, replace pedestal PCB, replace DC controller PCB

• Code: E716-0001
• Description: Error in communication to cassette pedestal, 2 / 3 delivery unit
  Error in data communication with 2 / 3 delivery unit
• Remedy: Check cable connection, replace 2 / 3 delivery unit PCB, replace DC controller PCB

• Code: E717-0001
• Description: Communication error with the NE controller
  The NE controller connected before the power is turned off fails to be recognized at power-on.
• Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR

• Code: E717-0002
• Description: Communication error with the NE controller
  A break in the IPC, IPC communication fails to recover
• Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR

• Code: E719
• Description: Communication error with the coin vender/card reader
• Remedy: Check on connection of the cable To recover from the error: In service mode COPIER>FUNCTION>CLEAR >ERR

• Code: E730
• Description: PDL error
• Remedy: Reset PDL, Turn OFF and back ON the main power