Description: DDI communication error
When the reader controller PCB has detected trouble in communication between the main controller PCB and reader controller PCB
Remedy: Disconnect and re-connect the reader communication cable connector, or replace the reader controller PCB. Replace the main controller PCB.
Remedy: Disconnect and re-connect the main controller PCBs (sub SJ, PE or R) or replace. Disconnect and re-connect the OPEN interface PCB or replace. Replace the main controller PCB (main).
Description: Instruction to restart accompanying change in product configuration
When the existing BootROM has been replaced with the BootROM of a different kind (when a PDL option was installed, etc.)
Remedy: Reset by turning the main power OFF and back ON.
Description: Instruction to restart accompanying change in product configuration
Error where SDRAM memory as high as 1 GB remains although the controller board version is an old one
Remedy: Check the combination of the main controller PCB and SDRAM.
Description: Drum Unit / Faulty Connection of the Toner Receptacle See below X: reading=1, writing=2 x indicates color [Y=1, M=2, C=3, K=4]
Trouble in the drum unit connections (trouble at the printer side)
Remedy: Check the drum unit connections or replace the unit.
Description: Drum Unit / Faulty Connection of the Toner Receptacle See below X: reading=1, writing=2 x indicates color [Y=1, M=2, C=3, K=4]
Write error in the memory inside the drum unit
Remedy: Check the drum unit connections or replace the unit.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.