Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC5185i — Trang 12/27

Code: E400-0003

Description: Feeder communication error
Reception interrupt error
Remedy: Check the connections between the ADF controller PCB and main controller PCB (sub). Replace the ADF controller PCB. Replace the main controller PCB (sub).

Code: E402

Description: Transport motor error
The transport motor (M2) fails to run. Defective transport motor clock sensor (SR1)
Remedy: When the transport motor encoder pulse is not detected even when 0.3 sec. has elapsed after the signal to drive the DF transport motor was set to ON

Code: E413-0001

Description: Pressure motor trouble
Pressure HP sensor OPEN
Remedy: Replace the pressure motor.

Code: E413-0002

Description: Pressure motor trouble
Pressure HP sensor CLOSE
Remedy: Replace the pressure motor.

Code: E490-0001

Description: Wrong model error
When the feeder of another model has been detected
Remedy: Connect the feeder for this unit.

Code: E500-0001

Description: Finisher communication error
When trouble in the prescribed number of times or in the prescribed period of time has been detected during communication between the copier itself and finisher
Remedy: Check the connections between the DC controller PCB and finisher controller PCB. Replace the finisher controller PCB. Replace the DC controller PCB.

Code: E503-0002

Description: Saddle communication error
When communication with the saddle stitcher is interrupted
Remedy: - Check the connections between the saddle stitcher controller PCB and finisher controller PCB. - Replace the saddle stitcher controller PCB and finisher controller PCB.

Code: E505-0001

Description: Finisher backup memory error
When the checksum value calculated by the CPU differs from the checksum values of the data held inside the RAM
Remedy: Replace the finisher controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie