Description: An error has occurred in the course of writing to the counter memory.
Normal access to the FRAM PCB is not possible. A value is written to a specific area for a check on connection to the FRAM PCB; when read back, however, it is not the value that has been written.
Remedy: Turn off the main power, and check the connection of the counter PCB. If the remedy fails, replace the counter PCB.
Description: An error has occurred in the course of writing to the counter memory.
When the soft ID of FRAM is being repaired, FRAM is not in an initialized condition.
Description: An error has occurred in the course of writing to the counter memory.
After an increase in the count, data is read into FRAM; when it is read back and compared, it is not the value that has been read into FRAM.
Description: An error has occurred in the course of writing to the counter memory.
A second after repair (from SRAM to FRAM) brings out different SRAM and FRAM counter readings. An attempt at repair has failed.
Remedy: Turn off the main power, and check the connector of the counter PCB. If repair fails, replace the counter PCB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.