Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iRC6870 — Trang 18/33

Code: E247-0001

Description: Error in counter memory or SRAM
An error exists in the SRAM and FRAM counter readings
Remedy: Replace the counter PCB or SRAM

Code: E248-0000

Description: There is an error in the EEPROM.
At time of start-up, a check error has occurred on the SRAM board
Remedy: Turn off the main power, and check the SRAM board; then, as necessary, replace the SRAM board, and turn on the main power.

Code: E248-0001

Description: There is an error in the EEPROM.
There is a power-on error.
Remedy: Replace the reader controller PCB.

Code: E248-0002

Description: There is an error in the EEPROM.
There is a write error.
Remedy: Replace the reader controller PCB.

Code: E248-0003

Description: There is an error in the EEPROM.
There is a wire/read error.
Remedy: Replace the reader controller PCB.

Code: E315-000E

Description: codex error
An error has occurred in the course of software decoding.
Remedy:

Code: E350-0000

Description: Fault in the soft ID PCB/function
An error exists in the add-on parity.
Remedy: Reset in service mode, and replace the soft ID PCB.

Code: E350-0001

Description: Fault in the soft ID PCB/function
An error has occurred in the course of full data read operation on the soft ID PCB.
Remedy: Turn off the main power, and check the connection of the soft ID PCB. If the remedy fails, replace the soft ID PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie