Causes: A motor ready state does not start 4 msec or more after the motor has been started. Cause The drum motor is faulty. The engine controller PCB is faulty.
Remedy: - Replace the main motor. - Replace the engine controller PCB.
Causes: The laser scanner unit is faulty. The engine controller PCB is faulty. During constant speed rotation, the cycle of the BD signal deviates for 2 sec or more from a specific cycle.
Remedy: - Replace the laser scanner unit. - Replace the engine controller PCB.
Causes: At a time other than power-on, an error has occurred in the communication between engine controller and video controller (caused by the engine controller).
Remedy: Turn off and then back on the power. - Replace the engine controller board.