• Code: E012-1
• Description: Main Motor Error
• Causes: While the main motor is rotating, it fails to maintain its normal rotation speed continuously for 1.2 sec. Cause The main motor is faulty. The DC controller PCB is faulty.
• Remedy: - Replace the main motor. - Replace the DC controller PCB.

• Code: E014-0
• Description: Fixing Motor Error
• Causes: The fixing motor fails to reach its normal rotation speed within 1.2 sec after it has started. Cause The fixing motor is faulty. The DC controller PCB is faulty.
• Remedy: - Replace the fixing motor. - Replace the DC controller PCB.

• Code: E014-1
• Description: Fixing Motor Error
• Causes: The fixing motor fails to maintain its normal rotation speed continuously for 1.2 sec after its has started. Cause The fixing motor is faulty. The DC controller PCB is faulty.
• Remedy: - Replace the fixing motor. - Replace the DC controller PCB.

• Code: E015-0
• Description: Lift-up Motor Fault
• Causes: SR1 does not indicate the presence of paper when the lift-up operation is executed for 8 sec or more (i.e., the paper surface is not detected). Cause The lift-up motor is faulty. The paper feeder driver PCB is faulty. The DC controller PCB is faulty.
• Remedy: - Replace the lift-up gear. - Replace the paper feeder driver PCB. - Replace the DC controller PCB.

• Code: E100-0
• Description: Scanner Assembly Fault. The laser scanner unit is faulty. The DC controller PCB is faulty.
• Causes: BD Error While the /BD signal is being sent to the video controller, the / BDI signal is not detected at specific intervals continuously for 0.1 sec. Cause The laser scanner unit is faulty. The DC controller PCB is faulty.
• Remedy: - Replace the laser scanner unit. - Replace the DC controller PCB.

• Code: E100-1
• Description: Scanner Assembly Fault. The laser scanner unit is faulty. The DC controller PCB is faulty.
• Causes: Scanner Fault The voltage of the laser intensity output signal drops below a specific level.
• Remedy: - Replace the laser scanner unit. - Replace the DC controller PCB.

• Code: E110-0
• Description: Scanner Motor Error
• Causes: The revolution of the scanner motor does not reach 98.3% of a specific value within 4 sec after it has started.
• Remedy: - Replace the laser scanner unit.

• Code: E110-1
• Description: Scanner Motor Error
• Causes: While the scanner motor is being driven, its revolution deviates between 98.3% and 102.1% of a specific range continuously for 1 sec or more.
• Remedy: - Replace the laser scanner unit.