Mã lỗi Canon LBP5460 — Trang 5/9
Code:
Tất cả lỗi (67)
E000-0000
E001-0000
E001-0001
E001-0004
E003-0000
E003-0001
E003-0004
E004-0000
E012-0002
E012-0003
E012-0004
E012-0005
E012-0006
E012-0007
E012-0008
E012-0009
E014-0000
E014-0001
E015-0000
E015-0001
E015-0002
E020-0000
E066-0000
E06F-0068
E078-0001
E100-0000
E100-0001
E100-0002
E100-0003
E100-0004
E110-0000
E110-0001
E196-0000
E196-0001
E198-0000
E602-0001
E602-0002
E602-0003
E602-0006
E602-0007
E604-0000
E730-100A
E730-C000
E730-C001
E733-0001
E733-0004
E733-0005
E733-0006
E740-0002
E740-0004
E744-0800
E744-0900
E744-1000
E748-4000
E748-4020
E760-0000
E804-0000
E805-0003
E805-0006
E806-0001
E808-0001
E825-0000
E825-0001
E825-0002
E825-0003
E825-0004
E840-0000
Description: Invalid RFU execution requested
Causes: D-con update for the host machine or the optional cassette is not completed.
Remedy:
Description: Invalid RFU execution requested
Causes: D-con update for the optional cassette is not completed.
Remedy:
Description: DC controller memory failure
Causes: A checksum failure is found in the block where specific information of the DC controller PCB is saved. A communication error occurred when reading the specific information of the DC controller PCB from the NVRAM at power-on.
Remedy: If the failure cannot be removed by turning the power OFF/ON, replace the DC controller PCB.
Description: HDD error
Causes: Lack of the HDD capacity The capacity of the HDD installed is smaller than that of the HDD used in the software.
Remedy:
Description: HDD error
Causes: Bootable load failure A Bootable CD was not contained. A Bootable CD was damaged.
Remedy: Burn the Bootable CD again.
Description: HDD error
Causes: HDD access error An error occurred caused by the device or hardware when accessing to the HDD during execution of bootrom. (Damage to the sector / Busy device status, etc.)
Remedy: Turn on the power again.
Description: HDD error
Causes: SubBootable load failure A SubBootable CD was not contained. A SubBootable CD was damaged.
Remedy: Burn the SubBootable CD again.
Description: HDD error
Causes: The contents (ICC-Profile, etc.) could not be detected. (The contents were not contained. The contents were damaged, etc.)
Remedy: Burn the Bootable CD again.