Mã lỗi Canon LBP7600C — Trang 7/10
Code:
Tất cả lỗi (73)
E000-0000
E001-0000
E001-0001
E003-0000
E003-0001
E004-0000
E012-0000
E012-0001
E014-0000
E014-0001
E015-0001
E020-0000
E021-0003
E021-0007
E021-1003
E021-2003
E052
E066
E070
E078-0000
E078-0001
E100-0000
E100-0001
E100-0002
E100-0003
E110-0000
E110-0002
E194-0000
E196-0000
E196-0001
E196-0002
E197-0001
E198
E602-0002
E602-0003
E602-0006
E602-0008
E602-1102
E602-1112
E602-1113
E602-1302
E602-1312
E602-1313
E602-1602
E602-1612
E602-1613
E604-0000
E604-0001
E616-0001
E721-0001
E730-100A
E730-C000
E730-D001
E733-0000
E733-0001
E733-0004
E733-0006
E740-0002
E740-0004
E740-0800
E740-0900
E740-1100
E747-0000
E748-2012
E748-4000
E748-4020
E760-0000
E805-0001
E805-0003
E805-0005
E806
E808-0001
E840-0000
Description: (LBP7680Cx only)
Causes: MEAP application was deleted by auto recovery at restart after E602-11XX.
Remedy: Initialize MEAP area in the flash memory with the following procedures, and install MEAP application again. 1. Initialize the MEAP area. Service Mode > FUNCTION GR. > MEAP > MEAP FUNCTION > ON 2. Install MEAP application again.
Description: Printer service call
Causes: Printer engine which was not supported by the controller was connected. Printer engine of a different model was connected.
Remedy: Only LBP7680Cx is supported.
Description: Printer service call
Causes: Printer service call
Remedy: Only LBP7680Cx is supported.
Description: Printer service call
Causes: An error, such as failure in memory retrieval at initialization, occurred.
Remedy: Only LBP7680Cx is supported.
Description: Printer service call
Causes: Printer communication error (communication error at initial communication and negotiation packet error)
Remedy: Only LBP7680Cx is supported.
Description: Printer communication error
Causes: Printer communication error (communication error at initial communication and negotiation packet error)
Remedy: - Turn OFF and then ON the power. - Replace the Engine Controller PCB.
Description: Printer communication error
Causes: Printer communication error (communication error after establishment of communication and parity error)
Remedy: - Turn OFF and then ON the power. - Replace the Engine Controller PCB.
Description: Printer communication error
Causes: Printer communication error (undefined command error)
Remedy: - Turn OFF and then ON the power. - Replace the Engine Controller PCB.