Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon LBP7660Cdn — Trang 6/10

Code: E602-1302

Description: E602-1102 to 1613 Only LBP7680Cx is supported.
Causes: File system initialization error (LBP7680Cx only)
Remedy: Execute the following procedures. 1. Turn OFF and then ON the power. 2. Download the /APL_CDS firmware again by Updater.

Code: E602-1312

Description: E602-1102 to 1613 Only LBP7680Cx is supported.
Causes: Device access error (LBP7680Cx only)
Remedy: Execute the following procedures. 1. Turn OFF and then ON the power. 2. Download the /APL_CDS firmware again by Updater.

Code: E602-1313

Description: E602-1102 to 1613 Only LBP7680Cx is supported.
Causes: Device access error (LBP7680Cx only)
Remedy: Execute the following procedures. 1. Turn OFF and then ON the power. 2. Download the /APL_CDS firmware again by Updater.

Code: E602-1602

Description: E602-1102 to 1613 Only LBP7680Cx is supported.
Causes: File system initialization error (LBP7680Cx only)
Remedy: Execute the following procedures. 1. Turn OFF and then ON the power. 2. Download the /APL_CDS firmware again by Updater.

Code: E602-1612

Description: E602-1102 to 1613 Only LBP7680Cx is supported.
Causes: Device access error (LBP7680Cx only)
Remedy: Execute the following procedures. 1. Turn OFF and then ON the power. 2. Download the /APL_CDS firmware again by Updater.

Code: E602-1613

Description: E602-1102 to 1613 Only LBP7680Cx is supported.
Causes: Device access error (LBP7680Cx only)
Remedy: Execute the following procedures. 1. Turn OFF and then ON the power. 2. Download the /APL_CDS firmware again by Updater.

Code: E604-0000

Description: Insufficient memory capacity
Causes: Insufficient memory capacity
Remedy: - Remove and then install the additional memory. - Replace the additional memory with a correct one. - Turn OFF and then ON the power. - Replace the Controller PCB.

Code: E604-0001

Description: Insufficient memory capacity
Causes: Failed to allocate the memory required to start PDL.
Remedy: - Remove and then install the additional memory. - Replace the additional memory with a correct one. - Turn OFF and then ON the power. - Replace the Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie