Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF726Cdw — Trang 5/12

Code: E001 0001

Description: Abnormal high temperature of Fixing Assembly (caused by Sub Thermistor)
Causes: It was detected that the temperature of the Sub Thermistor of the Fixing Assembly was abnormally high.
Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB.

Code: E003 0000

Description: Abnormal low temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly was abnormally low.
Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB.

Code: E003 0001

Description: Abnormal low temperature of Fixing Assembly (caused by Sub Thermistor)
Causes: It was detected that the temperature of the Sub Thermistor of the Fixing Assembly was abnormally low.
Remedy: 1. Check the connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB.

Code: E004 0000

Description: Error in fixing power supply drive circuit
Causes: The zero cross signal was not detected for the specified period of time or more.
Remedy: 1. Check the connector connection between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB.

Code: E012 0000

Description: Revolution of the ITB Motor did not reach the specified value
Causes: The cycle of the ITB Motor speed detection signal did not become the specified cycle since the ITB Motor started to be driven.
Remedy: 1. Check the connector between the ITB Motor and the DC Controller PCB. 2. Replace the ITB Motor. 3. Replace the DC Controller PCB.

Code: E012 0001

Description: Revolution of the ITB Motor was out of the specified range
Causes: After the cycle of the ITB Motor speed detection signal became the specified cycle once, it deviated from the specified cycle.
Remedy: 1. Check the connector between the ITB Motor and the DC Controller PCB. 2. Replace the ITB Motor. 3. Replace the DC Controller PCB.

Code: E014 0000

Description: Error in startup of Fixing Motor
Causes: Revolution of the Fixing Motor did not reach the specified value.
Remedy: 1. Check the connector between the ITB Motor and the DC Controller PCB. 2. Replace the ITB Motor. 3. Replace the DC Controller PCB.

Code: E014 0001

Description: Revolution of the Fixing Motor was out of the specified range
Causes: After the cycle of the Fixing Motor speed detection signal became the specified cycle once, it deviated from the specified cycle.
Remedy: 1. Check the connector between the ITB Motor and the DC Controller PCB. 2. Replace the ITB Motor. 3. Replace the DC Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie