Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF726Cdw — Trang 6/12

Code: E015 0001

Description: Error in Developing Disengagement Motor
Causes: Change in signal status of the Developing Home Position Sensor could not be detected although a specified period of time has passed after rotating the Main Motor for engagement/ disengagement operation of the Developing Cylinder.
Remedy: 1. Check the connectors connecting the Developing Home Position Sensor, Main Motor and the DC Controller PCB. 2. Replace the Developing Home Position Sensor. 3. Replace the Main Motor. 4. Replace the DC Controller PCB.

Code: E020 0000

Description: Density Sensor error
Causes: Sufficient amount of light could not be received when detecting image density.
Remedy: 1. Check the connector of the DC Controller PCB. 2. Replace the ITB Unit. 3. Replace the DC Controller PCB. 4. Replace the Toner Cartridge.

Code: E021 1003

Description: Developing Motor error
Causes: The Developing Motor failed to rotate.
Remedy: 1. Check the connector between the Developing Motor and the DC Controller PCB. 2. Replace the Developing Motor. 3. Replace the DC Controller PCB.

Code: E021 2003

Description: Developing Motor error
Causes: The cycle of the Developing Motor speed detection signal did not become the specified cycle since the Developing Motor started to be driven.
Remedy: 1. Check the connector between the Developing Motor and the DC Controller PCB. 2. Replace the Developing Motor. 3. Replace the DC Controller PCB.

Code: E024 0000

Description: Toner Level Sensor error
Causes: Error in output of the Toner Level Sensor (Yellow)
Remedy: 1. Replace the Toner Cartridge. 2. Replace the High Voltage Power Supply PCB. 3. Replace the DC Controller PCB.

Code: E024 0001

Description: Toner Level Sensor error
Causes: Error in output of the Toner Level Sensor (Magenta)
Remedy: 1. Replace the Toner Cartridge. 2. Replace the High Voltage Power Supply PCB. 3. Replace the DC Controller PCB.

Code: E024 0002

Description: Toner Level Sensor error
Causes: Error in output of the Toner Level Sensor (Cyan)
Remedy: 1. Replace the Toner Cartridge. 2. Replace the High Voltage Power Supply PCB. 3. Replace the DC Controller PCB.

Code: E024 0003

Description: Toner Level Sensor error
Causes: Error in output of the Toner Level Sensor (Black)
Remedy: 1. Replace the Toner Cartridge. 2. Replace the High Voltage Power Supply PCB. 3. Replace the DC Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie