Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF731Cdw — Trang 5/11

Code: 1118

Description: Door Open Jam1
Causes: Registration sensor/Multi-purpose Tray Paper Sensor/Cassette Feed Sensor
Remedy: SR1/SR6/SR31 Cassette1/Multi-purpose Tray/Cassette2

Code: 1158

Description: Door Open Jam1
Causes: Registration sensor/Fixing Delivery Sensor/Delivery Sensor/Duplex Re-pickup Sensor
Remedy: SR1/SR3/SR4/SR22 Registration Area to Delivery Area

Code: 1198

Description: Door Open Jam1
Causes: Registration sensor/Fixing Delivery Sensor/Delivery Sensor/Duplex Re-pickup Sensor
Remedy: SR1/SR3/SR4/SR22 Duplex Re-pickup Assembly

Code: 11D8

Description: Door Open Jam1
Causes: Registration sensor/Fixing Delivery Sensor/Delivery Sensor/Duplex Re-pickup Sensor
Remedy: SR1/SR3/SR4/SR22 Registration Area to Delivery Area Duplex Re-pickup Assembly

Code: E000-0000

Description: Error in temperature rising of Fixing Assembly
Causes: Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time.
Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E001-0000

Description: Abnormal high temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly was abnormally high.
Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E001-0001

Description: Abnormal high temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly (Sub Thermistor) was abnormally high.
Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.

Code: E003-0000

Description: Abnormal low temperature of Fixing Assembly
Causes: It was detected that the temperature of the Fixing Assembly was abnormally low.
Remedy: 1. Check the connector connection between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie