Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon MF731Cdw — Trang 8/11

Code: E021-2002

Description: Error in startup of the Cyan Developing Motor
Causes: Revolution of the Developing Motor did not reach the specified value.
Remedy: 1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E021-2003

Description: Error in startup of the Black Developing Motor
Causes: Revolution of the Developing Motor did not reach the specified value.
Remedy: 1. Check the harness/connector between the Developing Motor and the Engine Controller PCB. 2. Replace the Developing Motor. 3. Replace the Driver PCB. 4. Replace the Engine Controller PCB.

Code: E052-0000

Description: Duplex Feed Unit absent error
Causes: Connection of the Duplex Feed Unit was not correct.
Remedy: 1. Reinstall the Duplex Feed Unit.

Code: E066-0000

Description: Environment Sensor error
Causes: An error in the Environment Sensor was detected.
Remedy: 1. Check the harness/connection of the Environment Sensor and the Engine Controller PCB. 2. Replace the Environment Sensor. 3. Replace the Engine Controller PCB.

Code: E078-0000

Description: Primary transfer disengagement mechanism error
Causes: Primary transfer disengagement mechanism did not work properly.
Remedy: 1. Check the harnesses/connectors connecting the Primary Transfer Disengagement Switch, the Primary Transfer Disengagement Solenoid and the Engine Controller PCB. 2. Replace the Primary Transfer Disengagement Switch. 3. Replace the Primary Transfer Disengagement Solenoid. 4. Replace the Engine Controller PCB.

Code: E100-0000

Description: Yellow scanner area failure
Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the yellow scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E100-0001

Description: Magenta scanner area failure
Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the magenta scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.

Code: E100-0002

Description: Cyan scanner area failure
Causes: Error in the Scanner Motor, Laser Unit, or BD detection in the cyan scanner area
Remedy: 1. Check the harness/FFC/connector between the Laser Unit and the Engine Controller PCB. 2. Replace the FFC. 3. Replace the Laser Unit. 4. Replace the Engine Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie