Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon NP6085 — Trang 2/4

Code: E015

Description: After the pick up motor drive signal has been generated, clock pulses have not been generated within 2 sec.

Code: E019

Description: As many as 50,000 have been made after detecting a waste toner full condition.

Code: E020

Description: During copying, the toner supply signal is 0', indicating the absence of toner, for 3 min or more. During toner supply sequence at time of installation, the toner supply signal does not go '1' after 6 min or more.

Code: E030

Description: After the total copy counter has turned OFF, an open circuit is detected for the total copy counter.

Code: E032

Description: After the clock pulse signal reached the IPC communication format of the copier DC controller PCB, the Copy Data Controller-A1 does not detect the signal.

Code: E050

Description: While the paper jogging guide motor (M11) drive signal is being generated, the paper guide home position signal (THP) is not generated for 2 sec or more. While the paper jogging guide motor (M11) is being generated, the paper jogging guide home position signal (THP) is generated for two sec or more.

Code: E202

Description: The scanner home position signal (SCHP) is not generated within 10 sec after the power switch or the Copy Start Key is pressed.

Code: E203

Description: While the scanner motor drive signal is being generated, clock pulses are not generated within 2 sec.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie