Remedy: 1 CRU SENSOR ASSY is defective. With Imaging Cartridge installed, confirm that current flows between pins 1 and 2 of connector CN216 on the C232 MAIN board. Replace the CRU SENSOR ASSY. 2 ROS ASSY is defective. With power on, confirm that the voltage across pins 1 and 3 of connector P/J111 on the LD board (mounted on the ROS ASSY) is +5V. Replace the ROS ASSY. 3 LVPS ASSY is defective. Confirm that the LD ASSY is receiving power. Replace the LVPS ASSY.
Remedy: 1 CRU SENSOR ASSY is defective. With Imaging Cartridge installed, confirm that current flows between pins 1 and 2 of connector CN216 on the C232 MAIN board. Replace the CRU SENSOR ASSY. 2 ROS ASSY is defective. With power on, confirm that the voltage across pins 1 and 3 of connector P/J111 on the LD board (mounted on the ROS ASSY) is +5V. Replace the ROS ASSY. 3 LVPS ASSY is defective. Confirm that the LD ASSY is receiving power. Replace the LVPS ASSY.
Description: Communication Error (between main control circuit and engine control circuit)
Remedy: 1 C232 MAIN board is defective (This error indicates that there is a problem in communication between the main-control CPU and the engine-control CPU. Both of these CPUs are mounted on the C232 MAIN board.) Replace the board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.