• Code: 0100
• Description: Waste Ink pads is almost full (less than 1% remaining)
  The waste ink pads are almost full, causing a warning error. The printer can continue printing, but this messages overrides status messages such as Ready or Printing.
• Remedy: Replace the following parts and reset the counters as described below • Waste Ink Pads • F Box • Pump Assembly • Cap Assembly • Cleaner, Head • From Maintenance Mode 2 enter the Counter Init. Menu and initialize the Waste Ink counter and Cleaning counter.

• Code: 10020004
• Description: CPU vector 4 - General illegal instruction
• Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

• Code: 10020006
• Description: CPU vector 6 - Slot illegal instruction
• Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

• Code: 10020009
• Description: CPU vector 9 - CPU address error
• Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

• Code: 1002000A
• Description: CPU vector 10 - DMAC/DTC address error
• Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

• Code: 1002000B
• Description: CPU vector 11 - Watchdog time-out error
• Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

• Code: 100200xx
• Description: CPU vector 32 - 63
• Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.