Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson Stylus Pro GS6000 — Trang 6/6

Code: 2003

Description: Boot program sum error
Installation of the firmware has been failed. The Flash ROM is faulty.
Remedy: Install the main firmware again. Replace the MAIN BOARD ASSY . Replace the MAIN BOARD ASSY .

Code: 200A

Description: Program loading error
The SDRAM is faulty. The program cannot be loaded on the SDRAM.
Remedy: Replace the MAIN BOARD ASSY .

Code: 200B

Description: Internal insufficient memory error
The main firmware has a defect.
Remedy: Install the correct main firmware.

Code: 200C

Description: Servo interrupt watchdog time-out error
The servo cannot be controlled.
Remedy: Install the correct main firmware. Replace the MAIN BOARD ASSY .

Code: 200D

Description: System interrupt watchdog timeout error
A system failure such as CPU failure, defective cash or the like has occurred.
Remedy: Replace the MAIN BOARD ASSY .

Code: 200E

Description: Unknown NMI
The CPU has detected an unknown NMI.
Remedy: Replace the MAIN BOARD ASSY .

Code: 3000

Description: AC power shut-off
The AC power has been shut off due to a power failure, unplugged, P/S BOARD ASSY failure, or MAIN BOARD ASSY failure or the like.
Remedy: Check whether the AC cable is properly connected. If not, correct it. Replace the P/S BOARD ASSY . Replace the MAIN BOARD ASSY .

Code: FXXX

Description: CPU-related error
The firmware has a defect. The MAIN BOARD ASSY is broken.
Remedy: Install the correct main firmware. Replace the MAIN BOARD ASSY .
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie