Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson SureColor S30610 — Trang 12/12

Code: 2002

Description: SDRAM error
Writing to the SDRAM was attempted, but nothing could be written to it.
Remedy: Replace the Main Board.

Code: 2003

Description: FLASH BOOT checksum error
• Installing the firmware has failed. • The Flash ROM is out of order.
Remedy: 1. Re-install the firmware. 1. Replace the Main Board.

Code: 200A

Description: F/W load error
Reading/decompressing the firmware has failed.
Remedy: 1. Re-install the firmware. 2. Replace the Main Board.

Code: 200D

Description: System interrupt watchdog time-out error
A system failure such as CPU failure, or defective cash has occurred.
Remedy: Replace the Main Board.

Code: 3000

Description: AC shut-off
The AC power has been shut off due to a power failure, unplugged, Power Supply Board failure, or Main Board failure or the like.
Remedy: 1. Replace the Power Supply Board. 2. Replace the Main Board.

Code: Dxxy

Description: Service call for FW debugging
This error is intended to be used in the product development stage. It is supposed to not occur with marketed product, but may occur due to an unexpected cause such as external noises.
Remedy: 1. Re-install the firmware. 2. Replace the Main Board.

Code: Fxxx

Description: CPU related service call
• There is something wrong with the firmware. • The Main Board is out of order.
Remedy: 1. Re-install the firmware. 2. Replace the Main Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie