• Code: 15A9
• Description: Reel Motor oscillation error
  The control terminal (Vre terminal) of the Reel Motor driver has shorted out.
• Remedy: 1. Remove the foreign material. 2. If the error still occurs, replace the Main Board.

• Code: 15AA
• Description: Reel Motor overload error
  Overcurrent to the Reel Motor was detected. • Reel Motor cable disconnection. • Irregular load • Reel Motor encoder failure • Reel Motor failure
• Remedy: Replace the Reel Motor.

• Code: 15AB
• Description: Reel Motor over speed error
  The Reel Motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Reel Motor encoder failure • Sub-F Board failure • Reel Motor driver failure
• Remedy: 1. Replace the Reel Motor. 2. Replace the Sub-F Board. 3. Replace the Main Board.

• Code: 15AC
• Description: Reel Motor reversing error
  The number of occurrences of reversing the Reel Motor has reached a predetermined limit. • The polarity of Reel Motor cable is opposite. • Reel Motor failure
• Remedy: Replace the Reel Motor.

• Code: 15AD
• Description: Reel Motor driving time-out error
  Abnormally-long driving duration of the Reel Motor was detected. • Irregular load • Firmware becomes out of control.
• Remedy: Replace the Main Board.

• Code: 15AE
• Description: Reel Motor velocity deviation error
  The Reel Motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Reel Motor encoder failure • Reel Motor failure • Sub-F Board failure • Reel Motor driver failure
• Remedy: 1. Replace the Reel Motor. 2. Replace the Sub-F Board. 3. Replace the Main Board.

• Code: 15AF
• Description: Reel Motor lock error
  • Connection failure of the Reel Motor. • The Reel Motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Reel Motor encoder failure • Reel Motor failure
• Remedy: Replace the Reel Motor.

• Code: 1610
• Description: Roll/Reel Units mismatch error
  The combination of the Roll Unit and Reel Unit may be wrong; one of the units may be an optional unit.
• Remedy: Correct the combination of the Roll Unit and Reel Unit to either both are standard or both are optional.