Các lỗi thường gặp

Code :
  • Code: 141A
  • Description: Overload error
    Overcurrent to the pump motor was detected. • Pump motor encoder cable disconnection • Pump motor cable disconnection • Irregular load • Pump motor encoder failure • Pump motor failure
  • Remedy: Replace the pump motor encoder and pump motor .
  • Code: 141B
  • Description: Over speed error
    The pump motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Pump motor encoder failure • Pump motor driver failure
  • Remedy: 1. Replace the pump motor encoder . 2. Replace the MAIN BOARD.
  • Code: 141C
  • Description: Reversing error
    The number of occurrences of reversing the pump motor has reached a predetermined limit. • The polarity of pump motor encoder cable is opposite. • The polarity of pump motor cable is opposite.
  • Remedy: Replace the pump motor encoder .
  • Code: 141D
  • Description: Driving time-out error
    Abnormally-long driving duration of the pump motor was detected. • Irregular load • Firmware becomes out of control.
  • Remedy: Replace the MAIN BOARD. the
  • Code: 141E
  • Description: Velocity deviation error
    The pump motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Pump motor encoder failure • Pump motor failure • Pump motor driver failure
  • Remedy: 1. Replace the pump motor encoder and pump motor . 2. Replace the MAIN BOARD.
  • Code: 141F
  • Description: Lock error
    The pump motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Pump motor encoder failure • Pump motor failure
  • Remedy: Replace the pump motor encoder and pump motor .
  • Code: 14B0
  • Description: Life of the pump in the ink path (IC HOLDER life error)
    The IC HOLDER has reached its end of specified life. (The number of detaching ink cartridges has reached a predetermined limit.)
  • Remedy: Replace the IC HOLDER. and reset its counter .
  • Code: 14C0
  • Description: DAMPER KIT error
    The DAMPER KIT has reached its end of specified life
  • Remedy: Replace the DAMPER KIT and reset its counter .
 < 1 2 3 4 5 6 7 >  Last ›
popup

Số lượng:

Tổng tiền:

Danh mục