Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson SureColor T7000 — Trang 2/13

Code: 113C

Description: Reversing error
The number of occurrences of reversing the CR MOTOR has reached a predetermined limit. • The polarity of CR ENCODER cable is opposite. • The polarity of CR MOTOR cable is opposite. • Slipping of the teeth of CR TIMING BELT • CR ENCODER failure
Remedy: 1. Adjust the tension of the CR TIMING BELT. 2. Replace the CR ENCODER.

Code: 113D

Description: Driving time-out error
Abnormally-long driving duration of the CR MOTOR was detected. • Irregular load • Firmware becomes out of control.
Remedy: Replace the MAIN BOARD.

Code: 113E

Description: Velocity deviation error
The CR MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CR ENCODER failure • CR MOTOR failure • SUB BOARD is damaged. • CR MOTOR driver failure
Remedy: 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. 3. Replace the SUB BOARD. 4. Replace the MAIN BOARD.

Code: 113F

Description: Lock error
The CR MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure
Remedy: 1. Replace the CR ENCODER. 2. Replace the CR MOTOR.

Code: 1219

Description: Oscillation error
The control terminal (Vre terminal) of the PF MOTOR driver has shorted out.
Remedy: 1. Remove the foreign material. 2. If the error still occurs, replace the MAIN BOARD.

Code: 122A

Description: Overload error
Overcurrent to the PF MOTOR was detected. • PF ENCODER cable is damaged. • PF MOTOR cable is damaged. • Irregular load • PF ENCODER failure • PF MOTOR failure
Remedy: 1. Replace the PF ENCODER. 2. Replace the MAIN BOARD.

Code: 122B

Description: Over speed error
The PF MOTOR was driven at a speed faster than a predetermined one during deceleration. • PF irregular load • PF ENCODER failure • SUB-B BOARD is damaged. • PF MOTOR driver failure
Remedy: 1. Replace the PF ENCODER. 2. Replace the SUB-B BOARD. 3. Replace the MAIN BOARD.

Code: 122C

Description: Reversing error
The number of occurrences of reversing the PF MOTOR has reached a predetermined limit. • The polarity of PF ENCODER cable is opposite. • The polarity of PF MOTOR cable is opposite. • Slipping of the teeth of PF TIMING BELT • PF ENCODER failure
Remedy: 1. Adjust the tension of the PF TIMING BELT. 2. Replace the PF ENCODER.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie