Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP Color LaserJet 4610 — Trang 2/5

Code: 13.20.00

Display: 13.20.00 JAM IN TOP COVER AREA
Description: A page has jammed as it entered the fuser.
Remedy: 1 Press for detailed information about clearing the jam. 2 Press and to step through the instructions. 3 Check that the fuser paper sensor is in place. If it is defective, replace it. 4 Replace the fuser. WARNING! The fuser might be hot. 5 Replace the DC controller PCA. Calibrate the printer after replacing the DC controller.

Code: 13.XX.YY

Display: 13.XX.YY.JAM IN TRAY 1
Description: A page is jammed in the multipurpose tray.
Remedy: 1 Press ? for detailed information about clearing the jam. 2 Press up and down to step through the instructions. 3 Clean the pickup roller. If it is worn or damaged, replace it. 4 Clean or replace the separation pad. 5 Replace the tray 1 pickup solenoid. 6 Replace the tray 1 pickup motor. 7 Replace the paper pickup assembly. 8 Replace the DC controller PCA. Calibrate the printer after replacing the DC controller.

Code: 20

Display: 20 INSUFFICIENT MEMORY
Description: The printer has received more data from the computer than fits in the available memory.
Remedy: 1 Press GO to resume printing (see the note below). 2 Reduce the complexity of the print job to avoid this error. 3 Adding memory to the printer may allow printing of more complex pages. NOTE A loss of data will occur.

Code: 22

Display: 22 EIO X BUFFER OVERFLOW
Description: The printer EIO card in slot X has overflowed its I/O buffer during a busy state.
Remedy: Press GO to resume printing. NOTE A loss of data will occur.

Code: 22

Display: 22 PARALLEL I/O BUFFER OVERFLOW
Description: The printer parallel buffer has overflowed during a busy state.
Remedy: Press GO to resume printing. NOTE A loss of data will occur.

Code: 22

Display: 22 SERIAL I/O BUFFER OVERFLOW
Description: The printer serial buffer has overflowed during a busy state.
Remedy: Press GO to resume printing. NOTE A loss of data will occur.

Code: 40

Display: 40 BAD SERIAL TRANSMISSION
Description: A serial data error (parity, framing, or line overrun) has occurred while the printer was receiving data.
Remedy: Press GO to resume printing. NOTE A loss of data will occur.

Code: 40

Display: 40 EIO X BAD TRANSMISSION
Description: A connection with the card in EIO slot X has been broken abnormally.
Remedy: 1 Press GO to resume printing (see note below). 2 Check that all cables are connected to the EIO ports and that the EIO board is seated properly. 3 If possible, print to another network printer to verify the network is working properly. NOTE A loss of data will occur.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie