Display: 66.11.01 INPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER
Description: Indicates a 2,000-sheet input unit lifting motor error.
Remedy: 1 Verify that the c-link and power cables are connected. 2 Turn the printer off and on to reset the printer. 3 Verify that there are no objects or paper stored in the left side of the tray. 4 Verify that the lifting plate moves freely by hand. 5 Verify that the paper size plates are installed correctly, and that they are not bent. 6 Replace the paper deck drive assembly bushing. 7 Replace the paper deck drive assembly. 8 Replace the paper tray (tray 4) for the 2,000- sheet input unit.
Display: 66.11.02 INPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER
Description: Indicates a 2,000-sheet input unit feed motor error.
Remedy: 1 Verify that the c-link and power cables are connected. 2 Turn the printer off and on to reset the printer. 3 Verify that there are no objects in the left side of the tray. 4 Verify that the paper tray raised sensor (PS34) is working properly (perform a sensor test). 5 Check for proper installation of the pick-up roller. 6 Check the pick-up assembly and the paper deck drive assembly cabling. 7 Replace the pick-up assembly. 8 Replace the paper deck drive assembly.
Display: 66.11.03 INPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER
Description: Indicates a 2,000-sheet input unit lifting and feed motor error.
Remedy: 1 Verify that the c-link and power cables are connected. 2 Turn the printer off and on to reset the printer. 3 Verify that there are no objects in the left side of the tray. 4 Verify that the lifting plate moves freely by hand. 5 Verify that the paper size plates are installed correctly, and that they are not bent. 6 Replace the paper deck drive assembly bushing. 7 Replace the paper deck drive assembly. 8 Check that the paper tray raised sensor (PS34) is working properly (perform a sensor test). 9 Check for proper installation of the pick-up roller. 10 Check pick-up assembly cabling. 11 Replace the pick-up assembly.
Display: 66.22.<xx> OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER
Description: Indicates a multi-bin mailbox error. <xx> = Error code from the optional device
Remedy: 1 Verify that the c-link and power cables are connected. 2 Turn the printer off and on to reset the printer. 3 Replace the C-link cables. 4 Replace the multi-bin mailbox controller board PCA.
Display: 66.22.08 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER
Description: Indicates a multi-bin mailbox flipper motor error.
Remedy: 1 Verify that the c-link and power cables are connected. 2 Turn the printer off and on to reset the printer. 3 Check for jams in the flipper assembly area. 4 Replace the flipper assembly. 5 Replace the multi-bin mailbox controller board PCA.
Display: 66.22.09 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER
Description: Indicates a multi-bin mailbox external memory error.
Remedy: 1 Verify that the c-link and power cables are connected. 2 Turn the printer off and on to reset the printer. 3 Replace the multi-bin mailbox controller board PCA.
Description: Indicates that a recoverable error has been detected in the NVRAM. Values for some NVRAM settings were found to be illegitimate in form and were set back to their default value.
Remedy: 1 Verify the printer control panel settings. One or more fields have been reset to their factory defaults during the error recovery. 2 Perform a factory defaults reset. 3 Perform a cold reset
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.