Code :

Code: 30.01.18
Display: 30.01.18 Scanner failure
Description: The SCB ASIC failed.
Remedy: 1. Turn the product off and then on. 2. Check the connection on the SCB. 3. Replace the SCB. 4. Turn the product off and then on.

Code: 30.01.19
Display: 30.01.19 Scanner failure
Description: The scanner lamp failed.
Remedy: 1. Turn the product off and then on. 2. Determine if the scanner lamp turns on and off approximately 12 second after the product turns on. 3. If the lamp does not turn on and then off: a. View the lamp through the glass to determine if it is broken. Replace the lamp if it is broken. b. Re-seat the cables from the lamp to the inverter. c. Replace the inverter. 4. If the lamp does turn on and then off: a. Reseat the FFC interconnect between the optical carriage and the SCB. b. Replace the optical carriage. c. Replace the SCB.

Code: 30.01.25
Display: 30.01.25 Scanner failure
Description: The copy-process board (CPB) failed.
Remedy: 1. Turn the product off and then on. 2. Check the CPB LED. 3. Verify that the CPB connections are correct. 4. Verify the cable from the scanner to the formatter is not plugged in backwards. 5. Replace the CPB.

Code: 30.01.34
Display: 30.01.34 Scanner failure
Description: The scanner initialization failed, and the copy-process board (CPB) cannot communicate with the scanner-control board (SCB).
Remedy: 1. Turn the product off and then on. 2. Check the SCB LEDs. 3. Verify that the SCB connections are correct. 4. Replace the SCB.

Code: 30.01.39
Display: 30.01.39 Scanner failure
Description: There was an AFE1 (analog front-end) failure.
Remedy: 1. Turn the product off and then on. 2. Check the flat cables on the SCB. 3. Check the LEDs on the SCB. 4. Replace the SCB. 5. Replace the scanner

Code: 30.01.40
Display: 30.01.40 Scanner failure
Description: The scanner AFE 2 failed.
Remedy: 1. Turn the product off and then on. 2. Check the flat cables on the SCB. 3. Check the LEDs on the SCB. 4. Replace the SCB. 5. Replace the scanner.

Code: 30.01.41
Display: 30.01.41 Scanner failure
Description: There was a CPB error.
Remedy: 1. Check the SCB and CPB LEDs to verify that the scanner has power. 2. Verify that the scanner power cable is connected to the scanner power supply and fuser power supply. 3. Replace the CPB.

Code: 30.01.42
Display: 30.01.42 Scanner failure
Description: The scanner cable is disconnected
Remedy: 1. Connect the scanner cable to the formatter. 2. Turn the product off and then on.