Mã lỗi HP DesignJet 3500CP — Trang 3/7
Code:
Tất cả lỗi (49)
0000D8
010020
010021
010022
010023
010024
010030
010031
010032
010033
010034
010035
010036
010037
010038
010039
010040
010042
010043
010100
010101
010102
010110
010111
010120
010121
020000
020001
020002
020003
020004
020005
020006
020010
020011
040601
040xxx
050000
060000
060100
060200
060300
060400
060500
07xxxx
080001
08xxxx
090004
09xxxx
Description: The Ambient Temperature measured is out of the normal range.
Description: The status of one of the opticalsensors is not stable when it should be. Error data (X): 0 -Problem with the Media Sensor. 1 -Problem with the Pinch-arm Sensor. 2 -Problem with the Refill Assembly Sensor. 3 -Problem with the Elevator Sensor. 4 -Problem with the Service Station Sensor. 5 -Problem with the Primer Sensor.
Description: Problem with theCarriageBoard.
Description: Error reading the EEROM.
Description: An action outside the EEROM limits has been performed.
Description: Physical EEROM write and/or write operations failed. The EEROM data that is written does not match the data that is read.
Description: The content of the permanent configuration area of theEEROM is not valid when theprinter is initialized in Service Mode.
Description: The content of the User configuration area of the EEROM is not valid when the printer is initialized.