Mã lỗi HP DesignJet 3500CP — Trang 5/7
Code:
Tất cả lỗi (49)
0000D8
010020
010021
010022
010023
010024
010030
010031
010032
010033
010034
010035
010036
010037
010038
010039
010040
010042
010043
010100
010101
010102
010110
010111
010120
010121
020000
020001
020002
020003
020004
020005
020006
020010
020011
040601
040xxx
050000
060000
060100
060200
060300
060400
060500
07xxxx
080001
08xxxx
090004
09xxxx
Description: The refill position in the Y-axis is not calibrated.
Description: Problem with fine movement of the Y-axis motor.
Description: Error during initialization of the Y-axis.
Description: The MIO card does not support the MIO 6 protocol. Cards with version 5 or below can not be used with this plotter. Version 5.1 cards behave as expected but do not support PML instructions. Install the latest version.
Description: MIO Card Error
Description: The Line Sensor has problems finding the Mark Encoder.
Description: The Line Sensor is not functioning properly because there is too much ambient light.
Description: Incorrect Line Sensor type in the EEROM.