Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 510 — Trang 3/6

Code: 21:11

Description: Service Station cannot be detected or the Service Station is badly adjusted.
Remedy: Reconnect the Service Station Assembly. Reposition the Service Station trip lever.

Code: 22:10

Description: Ink Supply Station failure.
The possible cause could be: 1. Reading, writing or initializing the backup EEROM failed. 2. One of the out-of-ink sensors (located in the Ink Supply Station) is not reporting what it should during the initializing process while depressurizing.
Remedy: Replace the Ink Supply Station

Code: 41:10

Description: Paper-Axis Motor failure
Remedy: Replace the Paper-Axis Motor

Code: 41:13

Description: Error in the Paper-Axis Motor Encoder quadrature.
Remedy: Switch the Printer Off and wait a few minutes. Switch the Printer On again and check if the Error Code has disappeared. If the Error Code continues, replace the Paper-Axis Motor

Code: 42:10

Description: Scan-Axis Motor failure.
Remedy: Replace the Scan-Axis Motor

Code: 43:10

Description: Vacuum Fan failure.
Remedy: Replace the Vacuum Fan

Code: 43:11

Description: Vacuum Fan not detected.
Remedy: Reconnect the Vacuum Fan.

Code: 56:10

Description: Drive Roller Encoder Sensor error.
Remedy: Replace the Drive Roller Encoder Sensor If the problem persists, replace the Encoder Disk Assembly.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie