• Code: 011000
• Description: NIB Crash.
• Remedy: Power the Printer OFF and ON again using the Power Switch at the back of the Printer.

• Code: 050000
• Description: Lens has problems reading the Mark Encoder on the Drive Roller.
• Remedy: • Clean the Mark Encoder on the Drive Roller using the Turn DRIVE ROLLER Utility  • Replace the Lens Cover Assembly 

• Code: 050001
• Description: Lens has problems reading the Mark Encoder on the Drive Roller.
• Remedy: • Clean the Mark Encoder on the Drive Roller using the Turn DRIVE ROLLER Utility  • Replace the Lens Cover Assembly 

• Code: 06030C
• Description: Bad Line Sensor.
• Remedy: • Replace the Carriage Assembly  • Replace the Trailing Cable  • Replace the Main PCA  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

• Code: 0A0000
• Description: APS Failure.
• Remedy: • Check all the cables of the APS and make sure they are correctly connected and are NOT damaged. • Check all the tubes of the APS and Tubes System and make sure they are correctly connected and are NOT pinched or damaged. • Check that the Air Tube from the APS is correctly connected to the Tubes System. • Replace ONE Ink Cartridge at a time, checking if the System Error Code disappears. • Faulty APS. Replace the APS  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

• Code: 0A0010
• Description: APS Failure.
• Remedy: • Check all the cables of the APS and make sure they are correctly connected and are NOT damaged. • Check all the tubes of the APS and Tubes System and make sure they are correctly connected and are NOT pinched or damaged. • Check that the Air Tube from the APS is correctly connected to the Tubes System. • Replace ONE Ink Cartridge at a time, checking if the System Error Code disappears. • Faulty APS. Replace the APS  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

• Code: 0A0030
• Description: Problem in Depressurizing Air System.
• Remedy: • Check the APS for any signs of Ink. Also inspect ALL Ink Cartridges for any signs of leaking (the bottom valve of the Ink Cartridge will contain ink). • If there is ink leakage, replace ALL Ink Cartridges, the APS and the Tubes System. WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.

• Code: 0A0040
• Description: APS Failure.
• Remedy: • Check all the cables of the APS and make sure they are correctly connected and are NOT damaged. • Check all the tubes of the APS and Tubes System and make sure they are correctly connected and are NOT pinched or damaged. • Replace ONE Ink Cartridge at a time, checking if the System Error Code disappears. • Faulty APS. Replace the complete APS  WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.