Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 755CM — Trang 4/5

Code: 010051

Description: Next to uppermost SIMM indicates a failure.
Remedy: Replace next to uppermost SIMM.

Code: 010052

Description: Both upper and lower SIMMs indicate a failure.
Remedy: Replace both upper and lower SIMMs.

Code: 010080

Description: RS-232-C data overflow.
Remedy: Data byte was not read before another was entered into the UART. Replace main PCA. If problem remains report the firmware problem to the HP Response Center or the nearest HP Sales and Support Office.

Code: 020001, 020002

Description: Firmware problem. Bad EPROMS.
Remedy: For all 2XXXX errors, report the firmware problem to the HP Response Center or the nearest HP Sales and Support Office. Note conditions before the error occurred. Include system configuration in the report.

Code: 030000

Description: X-axis shutdown.
Remedy: All 300XX errors indicate a failure of hardware or electronics of the X- or Y-Axis. Refer to SERVO CONTROL SYSTEM FAILURES in this chapter.

Code: 030001

Description: Y-axis shutdown..
Remedy: Refer to code 030000.

Code: 030002

Description: Y-axis friction too high
Remedy: Refer to code 030000.

Code: 030003

Description: Y-axis failure
Remedy: Refer to code 030000.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie