Mã lỗi HP DesignJet 755CM — Trang 2/5
Description: Pen interface ASIC test failure.
Remedy: Replace main PCA.
Description: Communication failure between the main and servo processors. Communication occurs through the processor support ASIC.
Remedy: Replace main PCA.
Description: Servo interrupts not occurring or not reaching the mainprocessor through the processor support ASIC.
Remedy: Replace main PCA.
Description: Error inservo drive calculations.
Remedy: Replace main PCA.
Description: Error inEEROM checksum calculations.
Remedy: Replace or clear EEROM. Replace mainPCA. Perform all calibrations. Press Enter to temporarily clear.
Description: Error inEEROM write.
Remedy: Replace or clear EEROM. Replace mainPCA. Perform all calibrations.
Description: RS-232-C loopback test failure.
Remedy: Replace main PCA.
Description: Centronics test failure.
Remedy: Replace main PCA.