Code :

Code: 1700
Description: Servo Motor Error
The Paper-Axis or the Scan-Axis Motor moves the Carriage, but the input from the Linear Encoder Sensor does not change.
Remedy: • Make sure that there is no paper jam blocking the Carriage path. • Make sure that the corresponding cables are connected correctly to Connectors CN14 and CN17 on the Main PCA. • Make sure that the Linear Encoder Sensor Cable is connected correctly to the Carriage PCA. • Make sure that the Encoder Strip is not damaged or scratched. • Make sure that the pinchwheels rotate correctly. • Make sure that the Carriage gears work correctly • Replace the Main PCA. • If the error continues, replace the Paper-Axis or Scan-Axis Motors.

Code: H02
Description: Relay Board Error
The Heater Board and the Relay Board are not connected together.
Remedy: • Make sure that the Heater Board is connected correctly to the Relay Board via the Relay Cable. • Replace the Heater Relay Assembly.

‹ First < 2 3 4 5 6 >