• Code: 27.3:01
• Description: Calibration failed due to printhead in slot 3
• Causes: Calibration failed to due to poor performance of the yellow/black printhead in slot 3.
• Remedy: This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.

• Code: 27.4:01
• Description: Calibration failed due to printhead in slot 4
• Causes: Calibration failed to due to poor performance of the yellow/black printhead in slot 4.
• Remedy: This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.

• Code: 27.5:01
• Description: Calibration failed due to printhead in slot 5
• Causes: Calibration failed to due to poor performance of the light magenta/magenta printhead in slot 5.
• Remedy: This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.

• Code: 27.6:01
• Description: Calibration failed due to printhead in slot 6
• Causes: Calibration failed to due to poor performance of the light magenta/magenta printhead in slot 6.
• Remedy: This may impact your print quality. If it becomes unacceptable in the future, clean all printheads and check their status.

• Code: 27:01
• Description: Calibration failed due to a printhead
• Causes: Calibration may have failed due to a high number of blocked nozzles in a printhead.
• Remedy: Clean all printheads and check their status.

• Code: 27:14
• Description: A wrong printhead has been detected
• Causes: A wrong printhead has been detected.
• Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Remove the printheads and check that they are the correct ones for this printer. 3. Check that the printer has the latest firmware version; if not, update the firmware to the latest version. 4. Replace the printheads.

• Code: 29:01
• Description: Printhead Cleaning Cartridge incorrectly inserted
• Causes: The Printhead Cleaning Cartridge is incorrectly installed.
• Remedy: 1. Reseat the Printhead Cleaning Cartridge. 2. Replace the Printhead Cleaning Cartridge if the error continues.

• Code: 32:01
• Description: Take-Up Reel disconnected
• Causes: There is a cable connection problem with the Take-Up Reel.
• Remedy: 1. If you want to continue using the Take-Up Reel, you must turn off the printer and check that all Take- Up Reel cables are connected (sensor cables, printer cable). 2. If not, cut the substrate and then manually unload it from the Take-Up Reel.