Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet L28500 — Trang 6/24

Code: 14.56:11

Description: Overdrive power regulator V could not be read
Causes: Overdrive power regulator V could not be read.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Check cable connections. 3. Replace the control cables to the sine-wave converter.

Code: 14.60:10

Description: Overdrive power regulator current not null
Causes: Overdrive power regulator current not null.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Replace the sine-wave converter. 3. Run the Monitoring Sine-waves and Resistances diagnostic test.

Code: 14.61:10

Description: Overdrive power regulator current too high
Causes: Overdrive power regulator current too high.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Run the Monitoring Sine-waves and Resistances diagnostic test. 3. Check heaters with tester and replace heaters if necessary (short-circuit). 4. Replace the sine-wave converter.

Code: 14.62:10

Description: Overdrive power regulator short-circuit
Causes: Overdrive power regulator short-circuit.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Run the Monitoring Sine-waves and Resistances diagnostic test. 3. Check heaters with tester and replace heaters if necessary. 4. Replace the sine-wave converter.

Code: 14.66:11

Description: Overdrive power regulator R out of range
Causes: Overdrive power regulator R out of range.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Run the Monitoring Sine-waves and Resistances diagnostic test. 3. Check cable connections. 4. Check heaters with tester and replace heaters if necessary. 5. Replace the sine-wave converter.

Code: 14.67:10

Description: Overdrive power regulator OverTemp
Causes: Overdrive power regulator OverTemp.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Run the Monitoring Sine-waves and Resistances diagnostic test. 3. Check cable connections. 4. Check that the input voltage is within specifications. 5. Replace the sine-wave converter.

Code: 14.68:10

Description: Overdrive power regulator overvoltage or short-circuit
Causes: Overdrive power regulator overvoltage or short-circuit.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Run the Monitoring Sine-waves and Resistances diagnostic test. 3. Check cable connections. 4. Check that the input voltage is within specifications. 5. Replace the sine-wave converter.

Code: 14.69:10

Description: Overdrive sine-wave error
Causes: Overdrive power sine-wave error.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Replace the sine-wave converter.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie