Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet Z5200 — Trang 3/9

Code: 24:YZ

Description: Ink Setup failure ( Ink Delivery System (IDS) Tubes purge failed).
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the Right Ink Supply Station and PrintMech PCA the are not damaged and are correctly connected. • Try purging the Ink Supply Tubes again once the Printer has been restarted. • Install new Cartridges in the printer and try purging the Ink Supply Tubes again.

Code: 26.n:YZ

Description: (color = n) Order of Ink Supplies incorrect.
Remedy: • Remove the Ink Supply Cartridges and check that they are the correct ones for this printer and are in the proper order. • Check that the Printer has the latest firmware. If not, update the firmware to the latest version.

Code: 27:YZ

Description: An error has occurred in Printhead detection.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Remove the Printheads from the Carriage Assembly and reinsert them. • Replace the Printheads. • Replace the Carriage Cover (Flex Circuit) refer Carriage Cover (includes Carriage Latch). • Replace the Carriage PCA refer Carriage PCA. • Replace the Formatter refer Formatter.

Code: 29.n:YZ

Description: An error has occurred in Printhead detection.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Remove the Printheads from the Carriage Assembly and reinsert them. • Replace the Printheads. • Replace the Carriage Cover (Flex Circuit) refer Carriage Cover (includes Carriage Latch). • Replace the Carriage PCA refer Carriage PCA. • Replace the Formatter refer Formatter.

Code: 31:YZ

Description: An error has been detected with the cutter.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check the Cutter Assembly for blockage or any other obvious problems. • Replace the Cutter Assembly refer Cutter Assembly.

Code: 38:YZ

Description: An error has been detected with the Media Output Tray.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check the Media Output Assembly for blockage or any other obvious problems. • Replace the Media Output Assembly refer Media Output Assembly.

Code: 41.1:YZ

Description: Electrical fault or current limit in Media-Axis Motor.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Open the Window and check for any visible obstacles restricting the movement of the Media Advance Roller. If there is a wrinkled mass of media inside the paper path, lift the Pinch wheels (using Media Lever) and clear the obstruction. • Perform the Paper Drive diagnostic test to troubleshoot the problem further 2. Paper Drive. • Check that the Media Advance Drive cable is not damaged and is correctly connected to the Main PCA. • Replace the Media Advance Drive refer Media Advance Drive. • If the System Error continues, replace the Main PCA refer Electronics Module (Main PCA and PSU).

Code: 41:YZ

Description: Electrical fault or current limit in Media-Axis Motor.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Open the Window and check for any visible obstacles restricting the movement of the Media Advance Roller. If there is a wrinkled mass of media inside the paper path, lift the Pinch wheels (using Media Lever) and clear the obstruction. • Perform the Paper Drive diagnostic test to troubleshoot the problem further 2. Paper Drive. • Check that the Media Advance Drive cable is not damaged and is correctly connected to the Main PCA. • Replace the Media Advance Drive refer Media Advance Drive. • If the System Error continues, replace the Main PCA refer Electronics Module (Main PCA and PSU).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie