Code :

Code: 94:01
Description: The paper is not suitable for color calibration, being too dark (low L), or too coloured (a or b above thresholds), or transparent
Remedy: • If accurate color is important, change to a different paper type (preferably an HP paper type) that satisfies the conditions for color calibration. • If accurate color is not important, print without color calibration.

Code: 94:02
Description: Color calibration error: some of the consistency checks on the Embedded SpectroPhotometer (ESP) measurements failed, which could have several causes
Remedy: • Ensure that the paper type selected corresponded to the paper actually loaded. • Inspect the CLC printed target to detect any printing defect: banding, missing colors, etc. If an issue is detected, run the Printing IQ Full Calibration procedure to fix any printing problems. • Check that color calibration is supported for this paper type: translucent, plain and heavily colored papers cannot be color-calibrated. • If the problem persists, try calibrating an HP coated paper (if available). If this calibration fails, replace the ESP.

Code: 94:10
Description: Embedded SpectroPhotometer (ESP) contaminated by aerosol
Remedy: • Replace the ESP Embedded SpectroPhotometer (ESP). • Perform the ESP basic test (CLC) to ensure that the replaced part is working correctly.