• Code: 10.03.70
• Display: Replace Supplies
• Description: This alert appears only if the product is configured to stop when a supplies reach the very low threshold. Two or more supplies have reached the estimated end of life. The product indicates when a supply level is at its estimated end of life. The actual life remaining might be different than estimated. The supply does not need to be replaced now unless the print quality is no longer acceptable. HP recommends that the customer have a replacement supply available to install when print quality is no longer acceptable. NOTE: When an HP supply has reached its approximated end of life, the HP Premium Protection Warranty on that supply ends. Recorded event codes depend on which supplies are at the end of life.
  Yellow print cartridge
• Remedy: Press the OK button to find out which supplies need to be replaced. Or, configure the product to continue printing by using the Manage Supplies menu.

• Code: 10.10.15
• Display: Install <supply>
• Description: A supply item is either not installed or installed incorrectly.
  Cyan cartridge
• Remedy: Install the supply item or make sure that the installed supply item is fully seated.

• Code: 10.22.50
• Display: 10.22.50
• Description: The transfer kit life was reset above the order threshold. A new ITB was installed.
• Remedy: No action necessary.

• Code: 10.22.51
• Display: 10.22.51
• Description: The transfer kit life was reset above the replace threshold. A new ITB was installed.
• Remedy: No action necessary.

• Code: 10.22.52
• Display: 10.22.52
• Description: The transfer kit life was reset above the reset threshold. A new ITB was installed.
• Remedy: No action necessary.

• Code: 10.22.60
• Display: <Supply> low OR Supplies low
• Description: The product indicates when a supply level, or more than one supply, is low. Actual print cartridge life might vary. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable. When multiple supplies are low, more than one event code is recorded.
  Transfer kit
• Remedy: If print quality is no longer acceptable, replace the supply. HP recommends that the customer have a replacement supply available to install when print quality is no longer acceptable.

• Code: 10.22.70
• Display: <Supply> very low OR Supplies very low
• Description: The product indicates when a supply level, or more than one supply, is very low. Actual print cartridge life might vary. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable. When multiple supplies are low, more than one event code is recorded.
  Transfer kit
• Remedy: If print quality is no longer acceptable, replace the supply. HP recommends that the customer have a replacement supply available to install when print quality is no longer acceptable.

• Code: 10.22.70
• Display: Replace <supply>
• Description: This alert appears only if the product is configured to stop when a supply reaches the very low threshold. The product indicates when a supply level is at its estimated end of life. The actual life remaining might be different than estimated. The supply does not need to be replaced now unless the print quality is no longer acceptable. HP recommends that the customer have a replacement supply available to install when print quality is no longer acceptable. The product can be configured to stop when the supply level is very low. The supply might still be able to produce acceptable print quality.
  Transfer kit
• Remedy: Replace the specified supply. Or, configure the product to continue printing by using the Manage Supplies menu.