• Code: 33.01.01
• Display: 33.01.01
• Description: Recover occurred
• Remedy:

• Code: 33.01.02
• Display: 33.01.02
• Description: Initial save occurred
• Remedy:

• Code: 33.01.03
• Display: 33.01.03
• Description: Save/recover status OK
• Remedy:

• Code: 33.02.01
• Display: 33.02.01
• Description: Used board/disk installed
• Remedy:

• Code: 33.02.02
• Display: 33.02.02
• Description: Save/recover disabled (one or both disabled)
• Remedy:

• Code: 33.02.03
• Display: 33.02.03
• Description: Save/recover disabled (product functions normally)
• Remedy:

• Code: 33.XX.YY
• Display: 33.XX.YY Used board/disk
• Description: An encryped board or disk with existing data previously locked to a different product has replaced the original. If you continue, data is permanently lost.
• Remedy: To save the data on the board or disk, turn the product off. Replace the board or disk with another board or disk. To delete the data on the board or disk and continue, press the OK button.

• Code: 41.02.00
• Display: 41.02.00 Error
• Description: A beam detected misprint error.
• Remedy: Turn the product off, and then on. If the error persists, replace the laser/scanner assembly.